hella,

garrett,

siemens,

actuator,

ihi,

mitsubishi,

turbo,

6NW008412,

6NW 008 412,

turbo,

actuator,

hella actuator,

siemens actuator,

mitsubishi actuator,

P132A,

diagnostic program,

diagnostic tester,

fault codes,

ecu,

fault codes erasing,

inspections,

obd,

can,

fiat,

alfa romeo,

volkswagen,

audi,

seat,

skoda,

bosch,

mes,

hdk,

ignition system,

common rail,

injector cleaning,

injector pump,

fuel pump,

fuel system

Ask for product and price!

A set of connections for connecting a car

1. What is the CLEANMASTER fuel system cleaning device?

   The CLEANMASTER device enables effective cleaning of fuel systems in the spark and compression ignition engines without the need to dismantle their mechanical components. It is a response to the increasing problems with malfunctioning of the fuel injection systems, which result from the contamination of fuel systems.

2. Use of the CLEANMASTER system.

   The CLEANMASTER system is designed to clean fuel systems and low and high pressure components of the engine. It supports the following fuel systems: carburettor, one-point and multi-point mechanical fuel injection; one-point and multi-point injection controlled by an electronic unit. The following fuel systems are supported in compression-ignition engines: traditional mechanical direct and indirect injection, electronically controlled injection systems, also with fuel injection units and Common Rail injection systems.

3. The cleaning process.

   The cleaning process means administering a properly composed cleaning agent instead of the fuel which passes through the fuel system, dissolves obstructions and brings them into the cylinder so that they can be burnt. The most important item that requires cleaning is the injector.

4. Summary.

   All of the above information shows the need for periodic cleaning of fuel systems. The key factor is first, making the engine obtain the factory-set parameters and then taking care of the periodic cleaning of the fuel system.

Ask for product and price

Cost of delivery depends on the supplier and the country of destination.

Have a look at the injectors cleaning system - INMASTER 6U.

PRODUCTS

© - DeltaTech Electronics 1995-2012